Not all hair is the same — and not all hair oils are either. If you've been applying hair oil and seeing zero results, there's a good chance you've been using the wrong formula for your porosity type. Here's how to finally get it right with Braes.
What is Hair Porosity — and Why Does It Matter?
Hair porosity refers to your hair's ability to absorb and retain moisture. It's determined by how open or closed your hair cuticles are. Your porosity type dictates which ingredients your hair can actually absorb — and which ones will just sit on top.
🔓 High Porosity
Cuticles are raised/damaged. Hair absorbs moisture quickly but loses it just as fast. Common in bleached, heat-damaged, or chemically treated hair. Feels dry, frizzy, and breaks easily.
🔒 Low Porosity
Cuticles are tightly closed. Hair resists moisture absorption. Products sit on top rather than penetrating. Slow to dry, prone to buildup. Needs lighter, penetrating formulas.
🧪 Quick Porosity Test
The Float Test: Drop a single clean hair strand into a glass of water. Wait 2–3 minutes.
→ Floats = Low Porosity (cuticles closed, resists water)
→ Sinks = High Porosity (cuticles open, absorbs water fast)
→ Stays in middle = Normal/Medium Porosity
✨ For High Porosity Hair: Braes Nourishing Hair Growth Oil
High porosity hair needs heavier, richer oils that can fill in the gaps in damaged cuticles and seal moisture inside. The Braes Nourishing Hair Growth Oil for High Porosity is built exactly for this — a rich blend of four deeply nourishing oils that penetrate, coat, and seal every strand.
🌿 Ingredients
- 🌰 Jojoba Oil — Mimics scalp sebum; deeply moisturizes without clogging follicles
- 🫒 Olive Oil — Rich, emollient oil that coats the cuticle and locks in moisture
- 🫘 Castor Oil — Stimulates blood flow to the scalp to promote hair growth and thickness
- 🥑 Avocado Oil — Penetrates deep into the hair shaft; restores elasticity and prevents breakage
✅ Best For
✨ For Low Porosity Hair: Braes Hair Growth Oil Low Porosity
Low porosity hair needs lightweight oils that can slip through tightly closed cuticles without causing buildup. The Braes Hair Growth Oil for Low Porosity is silicone-free, fragrance-free, and uses a lightweight oil blend specifically chosen to penetrate resistant cuticles.
🌿 Ingredients
- 🌿 Eruca Oil (Arugula Seed Oil) — Rare, lightweight oil that penetrates low porosity cuticles; rich in fatty acids for scalp nourishment
- 🌰 Jojoba Oil — Balances scalp sebum production without weighing hair down
- 🫘 Castor Oil — Promotes hair density and reduces thinning at the roots
- 🌾 Argan Oil — Lightweight, fast-absorbing; adds shine and strengthens without buildup
✅ Best For
🔄 Side-by-Side Comparison
| Feature | High Porosity Oil | Low Porosity Oil |
|---|---|---|
| Formula Weight | Rich & nourishing | Lightweight |
| Key Oil | Avocado + Olive | Eruca + Argan |
| Hair Type | Damaged, frizzy, dry | Virgin, slow-drying |
| Size | 125ml | 125ml |
| Silicone-Free | ✓ | ✓ |
| Price | 250 EGP | 290 EGP |
💆 How to Use Your Hair Growth Oil
Step 1 — Section & Prep: Divide hair into 4 sections. Apply to clean, slightly damp hair for best absorption.
Step 2 — Scalp Massage: Using fingertips, massage a coin-sized amount directly onto the scalp for 3–5 minutes. This stimulates blood circulation to hair follicles.
Step 3 — Mid-Lengths to Ends: Work remaining oil through the lengths and ends of your hair. Focus on the driest sections.
Step 4 — Leave In or Rinse: Leave in overnight for an intensive treatment, or rinse after 30 minutes for a lighter result.
Frequency: Use 2–3 times per week for optimal growth and hydration results.
❓ Frequently Asked Questions
Can I switch between both oils?
Yes — if your hair is in different states (e.g., new growth at roots is low porosity but bleached ends are high porosity), you can use both. Apply the Low Porosity Oil to roots and the High Porosity Oil to ends.
How long until I see hair growth results?
Most users notice softer, stronger hair within 2–3 weeks. Visible growth results typically appear after 6–8 weeks of consistent use.
Can I use these oils with other hair products?
Yes. Both oils are compatible with shampoos, conditioners, and leave-ins. They're free from silicones that can block other products.
Find Your Perfect Match
Take the float test, know your porosity, and shop the right oil for real results.
High Porosity Oil — 250 EGP Low Porosity Oil — 290 EGP